AQUABLEND –DS
DESCALING CHEMICAL

AQUABLEND-DS is designed to remove the scaling& corrosion products from boiler& cooling water circuits , heat changers etc. It is a liquid formulation to remove hardness & low concentrated silica scales that can be removed offline by circulating its dilute solution of the chemical. It is a balance formulation of  Hydrochloric Acid, Dispersant Wetting Agents & Corrosion Inhibitor. 

                      BENEFITS

POWERFUL DESCALENT.

AQUABLEND-DS  is safe & non-corrosive for  descaling ,it dissolves hardness scales quickly & complectly..

SAFE FOR METALS .

AQUABLEND-DS contains a synthetic polymeric corrossion inhibitor which forms protective film on the parent metal surface to prevent acid  attack .

DETERGENT ACTION .

AQUABLEND-DS contains a wetting agent which emulsifies oil grease present in the deposits. The detergent action of Aquablend-DS loosens dirt ,silt,algae etc which can be removed  during water flushing. 

APPLICATION.

AQUABLEND- DS  should be dosed in 5-10 % solution in water . warm water may be used for faster action . normally the quantity of scale required depends upon the operating condition quantity of scales and hold up , Numatik Engineers Pvt Ltd  will provide technical assistance to setup optimum dosage according to operating  conditions  and system.

STORAGE & HANDLING

AQUABLEND-DS  should be stored in an air tight container away from direct heat. Always store at cool & dry place.. Wash thoroughly with water in case of contact. Do not swallow.

AQUABLEND-DS  is available in 35 Kg. HDPE CARBOY.