Water treatment plants exporter,water treatment plants trader,India,water treatment plant suppliers, numatik engineers pvt. ltd."

ACTIVATED CARBON – Activated Carbon is porous from of Carbon manufactured from internal surface area.

The porosity Creates a remarkable power of Adsorption, an indispensable Process in industrial separation.

Purification, decolonization & recovery technique. The Carbon atoms at the internal surface of Activated Carbon.

Exert an attraction ( Vendor waars force ) on the molecules of surrounding liquid & gas & fixes on to its pore walls.

This is the basis of mechanism whereby Activated Carbons may be used to remove one or more components from a mixture.

GRANULES – In GASPHASE adsorption, Granular Carbon is almost always used because the Pressure drop in the Carbon bed is of prime importance & Granular Carbon will allow sufficient flow with an acceptable pressure drop.

DUE to SUPERIOR ADSORPTION HIGH DENSITY, LOW ATTRITION LOSS, use of Granules has resuited in increased service life, greater filter efficiency, fewer regeneration cycles & economy on Hardware costs.

Activated Carbon Granuces made from coconut shell charcoal is used when a single product or grade is being continuously treated in large quantities. Normally Granular Carbon can be regenerated which involves washing or burining off the impurities & restoring the pore structure.

Water Treatment – Dechlorination, Oil removal from condensate, swimming pools, oil removal from compressed gases, waste water .
Mercury Recovery – ( Liquid & Gases ), Catalyst Camier, Gas Masks Gas Purification, Solvant Recovery, Radio Active Iodides, Cold Storage Room & Air Condition, Kitchen Vapour ( Hoods ) Removal of Process Impurities, Separation of Isomer, Wine Purification, Effeiuent Treatment, Gold Recovery .

SPECIFICATIONS OF ACTIVATED CARBON

Iodine No. mg / gm. Min	500	700	800	900	1000
Ash Max %	3.5	3.5	3.5	3.5	3.5
Moisture Max %	4.5	4.5	4.5	4.5	4.5
Apparent Density gm / C. C. Min	0.65	60	50	46	40
pH	7.5	7.5	7.5	7.5	7.5
pH	6.75	6.75	6.75	6.75	6.75

ANTHRCITE – Any standard sive size to suit customers of manufacturing .
SPECIFICATION OF UNWASHED POWDER GRADES

Properties		P – 100	P – 150	P – 200	P – 250	P – 280	P – 320
MB Value	Mg / g	100	150	200	250	280	320
KMno4	% min	25	25	45	55	60	70
Ash	% max	25	15	10	10	10	10
Iron (ppm)	Max	1000	1000	800	800	600	500
Acid Soluble (HCL)	% max	10	10	10	10	10	10
Water Soluble	%max	5	5	3	2	2	1
L.O.D.	%max	10	10	10	10	10	10
CL & SO4	Max	USP	USP	USP	USP	USP	USP
Ph		Alkaline	Alkaline	Alkaline	Alkaline	Alkaline	Alkaline
Particle Size		98% Passes through 100 Mesh	98% Passes through 100 Mesh	98% Passes through 100 Mesh	98% Passes through 100 Mesh	98% Passes through 100 Mesh	98% Passes through 100 Mesh

SPECIFICATION OF ACID WASHED POWDER GRADES

Properties		W – 150	W – 200	W – 250	W – 280	W – 320
MB Value	Mg / g	150	200	250	280	320
KMno4	% min	25	35	45	55	65
Ash	% max	8	5	4	4	3
Iron (ppm)	Max	300	200	200	150	200
Acid Soluble (HCL)	% max	5	3	2	2	1
Water Soluble	%max	5	1	1	1	1
L.O.D.	max	20	10	10	10	8
CL & SO4	Max	USP	USP	USP	USP	USP
Ph		6.0 to 7.5	6.0 to 7.5	6.0 to 7.5	6.0 to 7.5	6.0 to 7.5
Particle Size		98% Passes through 100 Mesh	98% Passes through 100 Mesh	98% Passes through 100 Mesh	98% Passes through 100 Mesh	98% Passes through 100 Mesh

SPECIFICATION OF GRANULAR GRADES

Properties		G – 500	G – 600	G – 800	G – 900	G – 1000
Appearance		Black Granular	Black Granular	Black Granular	Black Granular	Black Granular
Moisture	%max	5	5	5	5	5
Hardness	Min	85	85	95	95	95
Ph		8 – 11	8 – 11	8 – 11	8 – 11	8 – 11
Iodine Adsorption	Min	500	600	800	900	1000
Bulk Density		0.55 + 0.1	0.55 + 0.1	0.55 + 0.1	0.55 + 0.1	0.55 + 0.1
Ash	%max	5	5	5	5	5
Surface Areas	Min	600	700	800	1000	1100
CTC Adsorption	Min	25	45	45	60	65